Need help?Do you have a question about the Sym Fiddle II 50 SYM Series and is the answer not in the manual?
General| Brand | Sym |
|---|---|
| Model | Fiddle II 50 SYM Series |
| Category | Motorcycle |
| Language | English |
Details safety precautions for operating the motorcycle and working on it.
Checks ignition timing, CDI unit, and spark plug conditions.
Covers disc and drum brake inspection, fluid replacement, and pad wear.
Instructions for checking engine oil level and cleaning the oil strainer.
Instructions for inspecting and replacing gear oil.
Guide for installing the engine back onto the frame and connecting components.
Instructions for removing and disassembling the cylinder head.
Inspecting cylinder head, valve stems, guides, and seats.
Detailed instructions for replacing valve guides and servicing valve seats.
Steps for reassembling and installing the cylinder head.
Procedures for camshaft installation and valve clearance adjustment.
Step-by-step instructions for removing the cylinder and piston.
Inspecting cylinder wear and installing piston rings correctly.
Procedures for installing the piston into the cylinder and cylinder onto the engine.
Instructions for drive belt and sliding pulley inspection and replacement.
Procedures for installing the clutch/driven pulley assembly.
Step-by-step instructions for separating the crankcase halves.
How to measure crankshaft clearances, run-out, and inspect bearings.
Instructions for assembling the crankcase, crankshaft, and related components.
Precautions, specifications, and common brake problems.
Visual inspection of brake fluid, hoses, and pad wear.
Detailed procedure for replacing brake fluid and bleeding the system.
Instructions for caliper removal, pad replacement, and disk inspection.
To Next Page
