Sym Mio 50 User Manual

16. Electrical Equipment
16-19
Position light Bulb Replacement
Remove the front cover (3 screws)
Disconnect the headlight and position light wire
coupler.
Pull out the bulb and replace it with new one.
(12V/10W)
Front Turn Winker Light Bulb Replacement
Remove the front cover. (3 screws)
Turn left and pull out the bulb seat.
Pull out the bulb and replace it with new one.
(12V/10W)
Installation
Install the bulb in reverse order of removal.
To this chapter contents

Sym Mio 50 Specifications

General

Fuel System	Carburetor
Front Suspension	Telescopic Fork
Rear Brake	Drum
Ignition	CDI
Engine Type	4-Stroke
Cooling System	Air Cooled
Transmission	Automatic