In GPS mode (when the indicator is
constant), hold down the return to home
button to automatically return the aircraft
to its take-off position. During the return
flight, you can use the joystick controls to
make the aircraft ascend, descend and
move left/right in order to avoid obstacles.
To terminate the return flight, hold down
the return to home button.
If the remote control signal is lost for
more than 6 seconds, the aircraft will
automatically return to the take-off
position. If the signal is restored during
the return flight, you can hold down the
return to home button to terminate the
return flight.
-11-
!
No signal
Automatic return
due to loss of signal
* Photo and video recording gestures cannot be used when the bottom
camera is enabled.
* The camera may accidentally take a photo or start a video recording if
there are surrounding objects that resemble the or gestures.
* If there is no memory card in the aircraft, photos and video recordings will
be saved to your phone.
* If there is a memory card inserted in the aircraft, photos and video
recordings will be saved to the memory card and your phone.
* The aircraft supports memory cards with a capacity of up to 64 GB.
* If the aircraft is flying at an altitude of less than 20 m, it will automatically ascend to
an altitude of 20 m before returning home.
* If the aircraft is flying at an altitude of more than 20 m, it will return home at the
same altitude.
* The aircraft cannot automatically avoid obstacles during the return flight.
* The automatic return to home function is not available when the GPS signal is
weak (flashing indicator).
* If the aircraft does not receive a GPS signal and loses contact with the remote
control for more than 6 seconds, it will not be able to return to home and land
automatically.
Return to home function
English
To Next Page
Loading...
