SYMEO Local Positioning Radar System
LPR®-1D24
LPR®-1D24 Station – Overview and Mounting
Requirements for Power Supply
Copyright © SYMEO GmbH 2015
LPR-1D24_Users_Manual_FCC-IC-Edition_EN.docx Page 12 of 34
4 Requirements for Power Supply
The power supply should have the following characteristics:
Potential free
Output power at least 25 W
Output voltage 10 V DC to 36 V DC
Short-term maximum current flow (when switched on):
o At 24 V DC: 2000 mA for 50 ms
o At 12 V DC: 2500 mA for 50 ms
To Next Page
Loading...