SYMEO LPR-1D24 - 5.2 Power Supply

SYMEO Local Positioning Radar System
LPR®-1D24
LPR®-1D24 Station – Overview and Mounting
Specification of the Connectors
Copyright © SYMEO GmbH 2015
LPR-1D24_Users_Manual_FCC-IC-Edition_EN.docx Page 14 of 34
5.2 Power Supply
The LPR
®
-1D24 unit is powered by a 4-pin M12-Connector to the operating voltage (Figure 4
– Connection B6).
5.2.1 Plugs
Recommended connector:
o SACC-M12FST-4PECON-PG 9-M – 1418052
Cable diameter: 6 - 8 mm
Symeo order number: MTE101761
Figure 5: M12 Connector for the power requirement
5.2.2 Pin Assignment
Power Supply 10 V DC – 36 V DC
M12 Connector
V
DC
+
Pin 1
V
DC
+
Pin 2
V
DC
-
Pin 3
V
DC
-
Pin 4
Table 1: Pin assignment power supply
5.3 Ethernet M12
The LPR
®
-1D24 unit can be connected to the Ethernet via M12-Connector (Figure 4 –
Connection B1).