1.4.2.1 Heat dissipation
1.4.2.2 Thermal mounting considerations
1.4.2.3 Dimensions
1.4.2.4 Interference with magnetic fields
1.4.3 On-site installation guide (UL)
1.4.3.1 Branch fuse required
1.4.3.2 Field wiring terminal marking
1.4.3.3 Downloads
1.5 LED signals
1.5.1 Overview
1.5.1.1 Legend
1.5.2 Core LED
1.5.2.1 Firmware
1.5.2.2 Bootloader
1.5.3 Drive LED
1.5.4 Com LED
1.6 SOMANET Node Safety (Original instructions)
1.6.1 Dimensions
1.6.2 Specifications of the safety functions
1.6.2.1 System requirements
1.6.2.2 Technical specifications
1.6.2.3 Block diagram
1.6.3 Setup of the safety functions
1.6.3.1 Connecting the STO/SBC inputs
1.6.3.1.1 STO/SBC input port
1.6.3.1.2 Wiring examples for the STO/SBC inputs
1.6.3.1.2.1 Manual switch
1.6.3.1.2.2 Safety PLC (plus-minus output)
1.6.3.1.2.3 Safety PLC (plus-plus output)
1.6.3.2 Connection diagram for the brake
1.6.3.2.1 Brake power output (STO/SBC)
1.6.3.3 Connector mating parts and cable lengths
1.6.4 Using the safety functions
1.6.4.1 Timing diagrams
1.6.4.1.1 Timing diagram for STO-function without connected brake
1.6.4.1.2 Timing diagram for STO-function with SBC-function
1.6.4.2 Truth table for digital inputs
1.6.4.3 Diagnostic functions
31
31
33
34
36
36
37
38
39
39
39
40
40
41
41
42
43
44
45
45
45
47
49
50
50
51
51
52
52
53
54
55
56
56
56
57
59
59
To Next Page
Loading...
Need help?
General
