SYNAPTICON SOMANET Node Series Documentation

Two colored behavior: One part of the
LED is constantly luminous, the other
is blinking slowly (3 pulses per second)
Two colored behavior: One part of the
LED is constantly luminous, the other
is blinking fast (10 pulses per second)
1.4.2 Core LED
The tri-color LED is used by the firmware to indicate internal status and errors. It provides an overview
of the firmware state at a glance to quickly see whether a drive is operating nominally.
1.4.2.1 Firmware
CiA 402 State
Not
Ready
to
Switch
On
Switch
on
Disabled
Ready
to
Switch
On
Switched
On
Operation
Enabled
Quick
Stop
Fault
and
Fault
Reaction
EtherCAT
State
BOOT
INIT
PREOP
SAFEOP
OP
Hardware Manuals / SOMANET Node / SOMANET Node rev.
D.3/D.4
© 2020 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.2.0 | Build: 2020-10-02 26/27

SYNAPTICON SOMANET Node Series Specifications

General

Brand	SYNAPTICON
Model	SOMANET Node Series
Category	Servo Drives
Language	English