SYNAPTICON SOMANET Node Series Documentation

1.3 Installation Guide
This manual will guide you through the basic steps to get your SOMANET Node 400/1000 EtherCAT
running.
Attention
When dealing with electronic devices, always consider these handling instructions!
Important
For proper functionality of the current sensors the servo drive must not be exposed to external
magnetic fields, see our mounting instructions for details.
Wiring instructions
Connector pinouts
Grounding and connecting a brake
Mounting instructions
LED signals
After you have succussfully set up your servo drive you can proceed to commission and tune your
drive:
Commissioning and tuning with OBLAC Drives
1.3.1 Downloads
DOWNLOAD 3D MODEL
Hardware Manuals / SOMANET Node / SOMANET Node rev.
D.3/D.4
© 2020 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.2.0 | Build: 2020-10-02 9/27

SYNAPTICON SOMANET Node Series Specifications

General

Brand	SYNAPTICON
Model	SOMANET Node Series
Category	Servo Drives
Language	English