Synology DS620slim - Synology NAS Hardware Installation; Drive Installation Tools and Parts; Install Hard Drives into NAS

Tools and Parts for Drive Installation
• A screwdriver
• At least one 2.5” SATA drive (please visit
www.synology.com
for compatible drive models)
Warning:
If you install a drive that contains data, the system will format the drive and erase all existing data. Please
back up any important data before installation.
Install Drives
1
Pull and remove one of the drive trays.
2
Place a drive in the drive tray and tighten the screws provided to secure the drive in place, as illustrated below.
Hardware Setup
2
Chapter
8