Syntec 60CB - Kernel Server Configuration

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 57
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
a.
Analyze All
Path
5 key, 8 key: F5 Maintain → F1 Alarm → F4 Analyze All
10+8 key: G5 Maintain → F1 Alarm → F4 Analyze All
Explanation
Analyze alarms of all types.
Analyze CNC
Path
5 key, 8 key: F5 Maintain → F1 Alarm → F5 Analyze CNC
10+8 key: G5 Maintain → F1 Alarm → F5 Analyze CNC
Explanation
Analyze alarms of CNC type.
*The CNC alarms means all alarms excluding the MLC alarms.
4.9.2 Set Kernel Server
Path
5 key, 8 key: F5 Maintain → F2 Set Kernel Server
10+8 key: G5 Maintain → F2 Set Kernel Server
Explanation
Set up the system network
Parameters
IP Address Setting