机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
How to Operate 60 Series Controller– 139
•
•
•
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
•
•
•
5.5 File Transfer
This section will show how to transfer files, files transfer is divided into import and export files, allowing
controller share files to external devices, such as USB, CF card or users on the network.
5.5.1 File Import
Condition:
None.
Operation:
Path: F2 "Program" => F8 "File Manager" => F4 "File Transfer" => F1 "File Import"
A window will show up on screen, press F5 "Device Select", and move cursor to the desired
external device
Press "Enter" to access to the desired external device. If the device icon has red cross, it means
that there is no connection between CNC and this external device.
Press F2 "Select" to choose file. The box will be checked. Press F2 again to cancel it.
Press F3 "Select All" to select all files.
Press F4 "Cancel Select" to cancel all chosen files.
If the file is in the folder, move cursor on the folder and press "Enter" to enter it.
Move cursor on the "..." folder and press "Enter" or just press "Backspace" to back to the parent
folder.
Press F1 "Copy" to complete file importing.
After complete file transfer, press "Exit" or ESC to leave this window
5.5.2 File Export
Condition:
None
Operation:
To Next Page
Loading...
Need help?
General
