Syntec 60CB - Program Management

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 23
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
With【Home】【End】can let the cursor jump between the top and end of the line.
With the function key【Prog/File】can quickly switch between「Program」and「File Manager」.
4.6.1 Execute
Command
F2 Program→F1 Execute
Function
Execute current program and also change the screen to 「Monitor」 page.
Note
This function will be disabled during machining.
4.6.2 Delete Line
Command
F2 Program→F2 Delete Line
Function
Delete a line where the cursor is located.
4.6.3 Search/Replace
Command
F2 Program→F3 Search/Replace
Function
Quick search for every occurrence of a specific word or phrase and automatically replace text.