Syntec 60CB - Page 96

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 96
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4.9.18 System Setting
Path
5 key, 8 key: F5 Maintain → F5 Sys. Setting
10+8 key: G5 Maintain→ F5 Sys. Setting
Explanation
This page is used for system environment setting.
Operation Method
Move the cursor with【↑】【↓】【←】【→】
Switch pages with【PageUp】【PageDown】
Input/Display Unit
Explanation
Set the unit of input and display.
0: SI Units
1: Imperial Units
System Date/Time Setting
Explanation
Date format: YYYY/MM/DD
YYYY: year
MM: month
DD: day
Time format: HH/MM/SS
HH: hour
MM: minute
SS: second