[Worklist] Used for entering samples if no host connection is available
[Sampler] Standalone analyzers ONLY. Used to start sample analysis
[Con.Int] Tracked analyzers ONLY. Used to interrupt conveyer.
[Manual] Used for processing samples manually for stain or smear.
[SmearList] Database of last 1000 samples processed. Used to perform search
and provide information on time remaining.
[Status] Displays location of slides within analyzer as well as information on
pressures and temperature
[Settings] Allows the adjustment of various settings including staining protocols
[Maint.] Used to perform various bits of maintenance including changing
spreader, changing reagents and priming the lines
[Shutdown] Used to perform daily and weekly maintenance.
7. Operation area – Displays messages and buttons relating to the screen displayed in the
data processing area.
To Next Page
Loading...
