5
GB IE
Manufacturer
Our products are manufactured in compliance with
applicable EC standards and regulations.
Systemair GmbH
Seehöfer Straße 45
D-97944 Windischbuch
Germany
Office: +49 (0) 7930 - 9272-0
Fax: +49 (0) 7930 - 9272-91
EC Declaration of Conformity
as defined by the EC’s ATEX Directive 94/9EC.
Roof fan
Type Certificate no Authority
DVEX 315D4 SP07ATEX3129X SP *
DVEX 355D4 SP07ATEX3130X SP
DVEX 400D4 SP07ATEX3131X SP
DVEX 450D4 SP07ATEX3132X SP
DVEX 500D6 SP07ATEX3133X SP
DVEX 560D6 SP07ATEX3134X SP
DVEX 630D6 SP07ATEX3135X SP
*SP= Swedish National Testing and Research
Institute,
SE-501 15 BORÅS, Sweden.
The following harmonized standards are in use:
EN 60079-0:2004
Explosion protected electrical material, general
requirements.
EN 60079-7
Design with increased safety ‘e’.
The manufacturer ensures that the products above
are in compliance with the requirements in the
Machine directory, the Low voltage directory and
the EMC directory as listed below
EN 1127-1
Explosive atmosphere- Prevention of and protection
against explosion.
EN 13463-1:2001
Non-electrical equipment for potentially explosive
atmospheres.
EC Declaration of Conformity
As defined by EC’s Machine Directive 98/37/EC,
appendix II B.
The fan is not to be used before the parts, which it
is incorporated with, are in compliance with EC’s
Machine Directive.
The following harmonized standards are in use:
EN 60 204-1
Safety of machinery; electrical equipment of
machines; general requirements.
EN 60 034-1
Rotating electric machinery; part 1: Electrical ratings
and duty behavior.
SS-EN ISO 12100-1:2003.
Safety of machinery. Basic concepts, general
principles for design.
EN294
Safety of Machinery; Safety distances
to prevent danger zones being reached by the
upper limbs.
Observe: Conformity with EN 294 only concerns
mounted safety appliance under condition that
these are included in the delivery. The system
manufacturer is responsible for the compliance with
EN 294.
EC Declaration of Conformity
as defined by EC’s EMV-directive 2004/108/EC
The following harmonized standards are in use:
EN 61000-6-3: Electromagnetic compatibility -
Generic immunity-Emission –Part 1: General
requirements for equipment in homes, offices,
shops and similar environments.
EN 61000-6-2 Electromagnetic compatibility (EMC)
– Part 6-2: General requirements – Immunity for
appliances in industrial environments.
The complete technical documentation is available.
Windischbuch, September 2008
ppa. Harald Rudelgass
Technical director
To Next Page
Loading...
Need help?
General