EasyManua.ls Logo

SystemAir DVN - 14 Deinstallation;dismantling; 15 Disposal; 16 EU Declaration of conformity - Roof fans; 17 EU Declaration of conformity - Thermo fans

SystemAir DVN
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Deinstallation/dismantling |
19
Do not use steel brushes or sharp-edged objects.
Do not use a high-pressure cleaner (steam jet cleaner) under any circumstances.
Do not bend the fan blades when cleaning.
When cleaning the impeller, pay attention to balance weights that have been positioned
Keep the airways of the fan clear and clean them if necessary with a brush.
14 Deinstallation/dismantling
Deinstall and dismantle the fan in reverse order of installation and electrical connection.
15 Disposal
Ensure material is recycled. Observe national regulations.
The device and the transport packaging are predominantly made from recyclable raw materials.
Disassemble the fan into its components.
Separate the parts according to:
reusable material
material groups to be disposed of (metal, plastics, electrical parts, etc.)
16 EU Declaration of conformity Roof fans
Table 17 Roof fans
The manufacturer: Systemair GmbH
Seehöfer Straße 45
97944 Boxberg
Germany
Product designation: Roof fans
Type designation: DVS; DHS; DVSI; DVC/DVCI; DVP
Since year of manufacture:
2016
The manufacturer declares that the above mentioned products in their design and construction and the version
marketed by us complies with the harmonization legislation listed below:
EU directives: 2006/42/EC Machinery directive
2014/30/EU Directive electromagnetic compatibility (EMC)
2011/65/EU RoHS directive
2009/125/EC ErP guidelines
Regulations: 1253/2014 Only for ventilation units above 30W
17 EU Declaration of conformity Thermo fans
The manufacturer: Systemair GmbH
Seehöfer Straße 45
97944 Boxberg
Germany
Product designation: Thermo fans
Type designation: AxZent; KBR; MUB-K; MUB/T; MUB/T-S; DVN; DVNI
Since year of manufacture:
2018
The manufacturer declares that the above mentioned products in their design and construction and the version
marketed by us complies with the harmonization legislation listed below:
EU directives: 2006/42/EC Machinery directive
2014/30/EU Directive electromagnetic compatibility (EMC)
2011/65/EU RoHS directive
| 006

Related product manuals