T.E.L.L. EAG80 User Manual

Anleitung EAG80_26_00_2017_03_28_GB
Issue :28.04.2017
Program version as of C26.00
Before switching on the device or installing components, please
carefully read through the manual to avoid malfunctions by wrong or
incorrect operation or installation.
Manual
EAG80
Dosing programs

T.E.L.L. EAG80 Specifications

General

Brand	T.E.L.L.
Model	EAG80
Category	Accessories
Language	English

Summary

Property rights

1 Description of the device

1.1 Description of buttons

Details the function and purpose of each button on the device's interface.

1.2 Description of the display elements

2 Function of buttons

2.1 In weighing mode

Describes the functions of device buttons when operating in weighing mode.

2.2 In dosing menu / entry of components

3 Function of LEDs

2.3 In menu or during input

4 Menu structure

4.1 Menu General Settings (ALLGE)

4.1.1 Program Proб

4.1.5 Button Configuration

4.1.5.1 Zero Button Function

Configures the function of the zero button, including activation and deactivation.

4.1.5.2 Tare Button Function

Sets the behavior of the tare button, defining its activation and function.

4.1.6 Function Input Configuration

4.1.6.1 Input 1 Configuration

Defines the function and activation of Input 1 for device operation.

4.2 Menu Interfaces (Schnt)

4.2.1 Use of serial interfaces SE SC

Details the configuration and use of serial interfaces for data communication.

4.3 Menu filter settings (FILLE)

4.3.1 Filter selection FIL

Configures the filter selection to manage weight slowdown and measurement stability.

4.3.2 Filter speed SF

Sets the speed for weight measurement, from quick to slow.

4.4 Weighing System Settings

4.4.2 Weighing Element Settings

Configures basic settings for weighing elements, including load and mV/V values.

4.4.5 Zero Point Adjustment

Performs zero-point adjustment for improved accuracy with high dead loads.

4.4.6 Scale Calibration with Weights

Adjusts the scales using known weights for calibration.

4.5 Dosing Parameters

4.5.1 Maximum Container Weight

Input for the maximum container weight, used in dosing operations.

4.5.2 Residue Alarm Tolerance

Sets tolerance in kg for residue alarms during dosing.

4.5.3 Leakage/Filling Alarm Time

Configures time in seconds for leakage/filling alarms.

4.5.4 After-flow Measurement Time

Sets after-flow time for automatic after-flow measurement.

4.6 End of Program

5 Operating the device

5.1 Switching on the device

Procedure for powering on the device using the mains power supply.

5.2 Switching off the device

Instructions for safely powering off the device.

5.3.1 Set the scales to "0"

How to set the scales to zero, often used before weighing.

5.3.2 Taring the scales

Detailed steps for taring the scales to zero out container weight.

6 Error messages

6.1 Invalid Program Entry

Identifies an invalid program entry error and its cause.

6.2 Residual quantity Exceeded

Explains the error when residual quantity exceeds programmed limits.

6.3 Maximum Capacity Exceeded

Describes the error related to exceeding the maximum capacity.

6.4 Power Supply Alarm

Indicates a power failure alarm during the filling process.

6.7 Discharging quantity too big

7 Connecting the device

7.1 General Information

Provides general information on connecting the device and its components.

7.1.1 Serial Interface

7.3 Connection board

7.3.1 Connection of weighing elements

Instructions for connecting weighing elements to the device's terminal block.

7.3.2 Connection of inputs

7.3.3 Connection of outputs

8 Commissioning EAG80

8.1 Theoretical adjustment of scales

Procedure for theoretical scale adjustment using specific settings.

8.2 Input of time and date

Setting the device's internal time and date.

8.3 Settings for printers or large-size displays

Configuring settings for connected printers or large-size displays.

8.4 Settings for scales settling time

8.5 Test scales with highest possible weight

8.6 Entry of required functions

9 Input of quantities for components and dischargers