Manage Your OBD Device and Settings
The SyncUP Drive OBD Dongle Device includes a 4G Mobile Hotspot accessible via local
connectivity (Wi-Fi).
It includes the newest 802.11 b/g/n/ac Wi-Fi connectivity, both for 2.4 and 5GHz, enabling
an enhanced customer experience with the newest generations of smartphones or tablets.
To personalize the OBD device and change the Wi-Fi settings, use the SyncUP DRIVE
Application WiFi configuration menu:
- Wi-Fi ON/OFF
- change Wi-Fi network (called SSID) and Wi-Fi password
Note: Functionality to configure the Wi-Fi connection frequency bands (2.4/5GHz) will be
added to the App during a future App update
Reset the OBD Device
You can reset the OBD device to the factory settings via the OBD device Reset Pinhole.
While the device is powered, insert a pin into the Reset Pinhole and hold for at least 10
seconds. Then wait for it to entering low power mode.
NOTE: When you reset the OBD device, any currently connected devices will lose access
and will have to be reconnected after the OBD device restarts.
8
To Next Page
