T Scale NHB Series User Manual

NB/NHB Series Technical Manual
- 14 -
6.7.3automatically accumulate
To enable accumulation automatically function, to select parameter
F3 COM
>
P
AUTO, press key to confirm, you need set baud rate and printer type, language,
press key to escape
Operation
 Place the load on the platform.
 after stable, you will hear beep on twice.
 add or remote weight , scale will beep on again after stable
 Remove the weight from the pan.
 Press key , the total saved value will be show only three seconds
6.8 Set Backlight
 Press key during self checking to select parameter F2 BL ,press
key to select (EL AU/ EL OFF/ EL ON),press key to confirm

T Scale NHB Series Specifications

General

Brand	T Scale
Model	NHB Series
Category	Scales
Language	English