T Scale NHB Series - Parameters Configuration

NB/NHB Series Technical Manual
- 15 -
7. PARAMETERS
Enter the Menu
 Turn on the scale. Press during that start up until display will be shown
Choose the Menu
 Press , it can choose menu block or options one by one.
Enter the Selected Menu
 Press , it can confirm which will be shown displayed.
Enter in to TECH
Note: Before enter the tech menu, press calibration switch, which is locating
below the scale
 When display showed Pi n , press and keys to enter the
function
Escape from the Menu
 Press key, it can escape from the menu to weighing mode.
F1 unt