13. Press the “APPLY” button. When the instrument says it okay to shutdown, turn
off the power switch on the back of the instrument.
14. Disconnect all cords, cables, and tubing to the instrument.
15. If shipping the instrument in the reusable TA plastic shipping container;
a. Place instrument in shipping container.
b. Place top portion of shipping container over the instrument. Note the
direction, the “FRONT” is labeled on both the top and bottom portions of
the container. Secure the latches on all of the sides.
c. Your instrument is now ready to ship.
16. If shipping the instrument in the cardboard shipping carton;
a. Carefully lift the instrument and remove the feet.
b. Place the instrument on the plastic pallet.
c. Secure instrument to pallet with 4 shipping bolts.
d. Place feet and accessories into accessory box and place box next to
instrument on pallet.
e. Place outside carton over pallet and seal with heavy-duty tape.
f. Using a strapping kit, secure outside carton to the plastic pallet.
g. Your instrument is now ready to ship.
TA Instruments strongly recommends using a Motor
Freight Carrier!
Page 3 of 3
To Next Page
Loading...
Need help?
General
