Need help?Do you have a question about the TA Instruments TGA 2050 and is the answer not in the manual?
General| Temperature Range | Ambient to 1000°C |
|---|---|
| Heating Rate | 0.1 to 100 °C/min |
| Balance Sensitivity | 0.1 µg |
| Atmosphere Control | Inert, Oxidizing, Reducing |
| Gas Switching | Automatic |
Defines the meaning of NOTE, CAUTION, and WARNING symbols for safe operation.
Provides contact information for technical assistance, service, and ordering.
Details essential safety precautions for electrical, chemical, thermal, and mechanical hazards.
Introduces the TA Instruments Thermogravimetric Analyzer (TGA) 2050 and its analytical capabilities.
Details the five major components of the TGA system: balance, sample loading, furnace, cabinet, heat exchanger.
Lists technical specifications including temperature range, heating rate, and optional accessories.
Provides step-by-step instructions for safely unpacking and repacking the TGA instrument.
Covers inspecting the system, choosing a location, and connecting cables and lines.
Guides on installing, aligning, and adjusting the sample and tare hang-down wires.
Covers pre-run checks, temperature/weight calibration, and sample preparation.
Instructions for loading samples, setting up experimental methods, and using accessories.
Procedures for initiating, discontinuing, and completing TGA experiments.
Explains the null balance principle, operating ranges, and theory of TGA analysis.
In-depth descriptions of the balance, furnace, cabinet, and heat exchanger.
Lists and explains the various status codes displayed by the TGA instrument.
Covers periodic inspection, cleaning of keypad and furnace tube.
Details heat exchanger coolant maintenance and draining/refilling the water reservoir.
Covers fuse checks, power failures, and instrument diagnostic tests.
Provides a list of part numbers for replacement components.
Lists addresses and phone numbers for TA Instruments offices worldwide for ordering.
To Next Page