TA I
NSTRUMENTS
TGA 2050 2–1
CHAPTER 2: Installing the
TGA 2050
Unpacking/Repacking the 2050 .................. 2-3
Unpacking the 2050 ............................. 2-3
Repacking the 2050 .............................. 2-6
Installing the Instrument ............................ 2-7
Inspecting the System.......................... 2-8
Choosing a Location ........................... 2-9
Filling the Heat Exchanger................ 2-10
Connecting Cables and Lines............ 2-12
Heat Exchanger Cable
and Water Lines.......................... 2-12
GPIB Cable ................................. 2-14
Purge Lines ................................. 2-17
Cooling Gas Line ........................ 2-19
Power Cable................................ 2-20
Unpacking the Balance ............................ 2-21
Installing the Hang-Down Wires....... 2-23
Aligning the Sample
Hang-Down Wire .............................. 2-27
Adjusting the Sample Platform ......... 2-31