Need help?Do you have a question about the TA Instruments Q200 and is the answer not in the manual?
General| Type | Differential Scanning Calorimeter (DSC) |
|---|---|
| Cell Type | Tzero Technology |
| Temperature Resolution | 0.001 °C |
| Technique | Differential Scanning Calorimetry |
| Cooling Rate | 0.1°C/min to 50 °C/min (ballistic to -90°C) |
| Atmosphere | Inert, Oxidizing, Reducing |
| Cooling System | Mechanical Refrigeration or Liquid Nitrogen |
| Sample Pan Type | Aluminum |
| Data Sampling Rate | Up to 1000 points/second |
| Power Requirements | 100-240 VAC, 50-60 Hz |
Connecting Ethernet, gas lines, cooling lines, power cables, and ports for DSC operation.
Steps for voltage configuration, power cable installation, and starting the DSC.
Recommended procedure for safely shutting down the DSC instrument.
Outlines experiment procedures, including essential calibration types like TzeroTM, baseline, and heat capacity.
Step-by-step guide for executing DSC experiments, including sample loading and stopping procedures.
Covers essential maintenance tasks like cleaning touch screens, cells, and removing contamination.
To Next Page