TA Instruments Q200 User Manual

DSC Q Series Getting Started Guide
62
Replacement Parts
Replacement parts for the DSC that are available from TA Instruments. See the tables below when ordering parts.
Fuses, Cords, and Cables
Part Number Description
205221.001 Fuse (6.3 amp, 250 V)
205221.002 Fuse (10 amp, 250 V)
205224.035 Fuse (0.75 amp, 250V Slo Blo) for 230V/50Hz RCS
205224.039 Fuse (1.0 amp, 250V Slo Blo) for 120V/60Hz RCS
251470.025 Ethernet cable (7.7m [25 foot], shielded)
253827.000 Power cord 120 V(Q10, Q100, Q1000, RCS)
270469.001 Power cord 220 V (RCS)
920223.901 Event cable
DSC Cells, Lids, and Accessories
Part Number Description
910824.001 Cell cleaning brush
970020.901 Removable cell (Q2000/Q1000)
970520.901 Fixed Cell (Q200 / Q100 / Q20 / Q10 / AQ20) - Service installation required
970045.901 Removable cell thumb screw (Q200/Q1000)
970132.001 Cell plate gasket
970464.001 Upper lid (AutoLid II - Q200, Q20000)
970442.001 Inner lid (Manual - Q20, AutoLid II - Q200, Q2000)
970283.001 Outer manual lid (Q10, Q20)
970284.901 Manual cell cover (Q10, Q20)
970291.001 Inner lid (AutoLid I - Q100, Q1000)
970292.901 Auto cell cover (AutoLid I - Q100, Q1000, AutoLid II - Q200, Q2000)
970294.001 Auto lid clamp (AutoLid I - Q100, Q1000)
970295.001 Auto lid clamp spring (AutoLid I - Q100, Q1000)
(table continued)

TA Instruments Q200 Specifications

General

Brand	TA Instruments
Model	Q200
Category	Measuring Instruments
Language	English