DSC Q Series Getting Started Guide
9
Safety
CAUTION: The operator of this instrument is advised that if the equipment is used in a
manner not specified in this manual, the protection provided by the equipment may be
impaired.
Instrument Symbols
ThefollowinglabelsaredisplayedontheDSCinstrumentforyourprotection:
Symbol Explanation
Indicatesthatahotsurfacemaybepresent.Takecarenottotouchthisareaorallow
anymaterialthatmaymeltorburncomeincontactwiththishotsurface.
Thissymbolontherearaccesspanelindicatestha
tyoumustunplugtheinstrument
beforedoinganymaintenanceorrepairwork;voltagesexceeding120/240Vacarepresent
inthissystem.
Ifyouarenottrainedinelectricalprocedures,donotremovethecabinetcoversunless
specificallyinstructedtodosointhemanual.Maintenanceandrepairofinternalparts
mustbeperform
edonlybyTAInstrumentsorotherqualifiedservicepersonnel.
Pleaseheedthewarninglabelsandtakethenecessaryprecautionswhendealingwiththosepartsofthe
instrument.TheDSCGettingStartedGuidecontainscautionsandwarningsthatmustbefollowedforyourown
safety.
Electrical Safety
CAUTION: The hold-down thumbscrews that hold the DSC Q2000/Q1000 cell in place
ensures proper lid alignment and electrical connections. You cannot run experiments
without them. If they are not fully in place, the instrument may not be able to apply power
to the cell and will not operate.
Youmustunplugtheinstrumentbeforedoinganymaintenanceorrepairwork;voltagesashighas120/2 40Vac
arepresentinthissystem.
WARNING: High voltages are present in this instrument. Maintenance and repair of
internal parts must be performed only by TA Instruments or other qualified service
personnel.
To Next Page
Loading...
Need help?
General
