Need help?Do you have a question about the TA Instruments Q20 and is the answer not in the manual?
General| Model | Q20 |
|---|---|
| Type | Differential Scanning Calorimeter (DSC) |
| Temperature Range | -90°C to 550°C |
| Heating Rate | 0.1°C/min to 100°C/min |
| Cooling Rate | 0.1°C/min to 100°C/min |
| Sensitivity | 0.2 µW |
| Atmosphere | Inert, Oxidizing, Reducing |
| Sample Pan Type | Aluminum |
Instructions for unpacking and repacking the DSC instrument.
Procedures for installing the DSC instrument, including connections and checks.
Steps to inspect the DSC system for shipping damage and missing parts.
List of safety requirements for electrical equipment in various regions.
Explanation of labels displayed on the DSC instrument for user protection.
Safety precautions related to high voltages within the instrument.
Safety measures related to hot or cold cell surfaces during experiments.
Guidelines for safely lifting and carrying the DSC instrument.
Description of the heat flux DSC cell and its thermal network model.
Explanation of the five primary function keys on the Q1000/Q100 touch screen.
Description of the nine ports located on the rear of the DSC instrument.
Steps to connect the DSC instrument to an Ethernet switch.
Instructions for installing the Finned Air Cooling System (FACS).
General outline of steps for performing DSC experiments.
Prerequisites and checks before setting up a DSC experiment.
Steps for calibrating the Autosampler via touch screen or control menu.
General outline of steps for performing DSC experiments.
Procedures for cleaning a contaminated DSC or PDSC cell.
To Next Page