Need help?Do you have a question about the TA Instruments Q10 and is the answer not in the manual?
General| Brand | TA Instruments |
|---|---|
| Model | Q10 |
| Category | Measuring Instruments |
| Language | English |
Lists safety requirements for electrical equipment from various regulatory bodies.
Details EMC standards for industrial, scientific, and medical equipment.
Explanation of warning symbols and electrical safety precautions.
Safe handling procedures and precautions for using liquid nitrogen.
Precautions for thermal hazards and lifting the heavy DSC instrument.
General introduction to DSC and its main components, including the cell.
Description of FACS, RCS, Quench Cooler, and LNCS for temperature control.
Operation of Q2000/Q200 touch screen, Q1000/Q100 touch screen, and Q20/Q10 keypad.
Overview of accessories, specialized cells, and instrument specifications.
Covers unpacking, inspecting, choosing location, and connecting cables/lines.
Procedure for connecting purge and cooling gas lines to the DSC.
Covers voltage configuration, power, starting, and shutting down the DSC.
Step-by-step guide to installing FACS, Quench Coolers, and additional items.
Steps for preparing, running, and stopping DSC experiments.
Detailed procedures for various DSC calibrations including Tzero, heat capacity, and pressure.
Instructions for calibrating the DSC Autosampler for accurate sample handling.
Procedures for cleaning, troubleshooting, and replacing fuses and parts.
To Next Page