Option Choices Default Description
Custom File-
name
Prompt
Skip
Prompt
When set to Prompt, the user is prompted to
enter the filename.
When set to Skip, the default filename is used.
Raw File Ext
Default
.dmg
Default Sets the extension to the default value or .dmg.
Case ID
Prompt
Skip
Skip
When set to Prompt, the TD2u prompts the
user to enter Case ID.
When set to Skip, the Case ID is suppressed in
subsequent logs.
Case Notes
Prompt
Skip
Skip
When set to Prompt, the TD2u prompts the
user to enter Case Notes.
When set to Skip, Case Notes are suppressed in
subsequent logs.
Error Recov-
ery
Standard
Exhaustive
Standard
The TD2u supports two different error recovery
modes: Standard and Exhaustive. If an error is
encountered on the source drive during a read
operation, the TD2u can be configured to retry
the operation, depending on the Error Retry
Count setting.
The Standard setting retries the 32K block until
it either succeeds or the Error Retry Count is
exceeded.
The Exhaustive setting causes the TD2u to
attempt to recover each sector.
To Next Page
Loading...
