Tableau TD2u - Save All Logs (Menu 6.2); Delete All Logs (Menu 6.3); Print All Logs (Menu 6.4)

Files written: 3
Filename of First File: 2017-11-28_16-53-33/image.E01
------------------Disk Duplication Results------------------
Total Errors: 0
Acquisition MD5: 24dc702868cf6291f5ce28c6427d460a
Acquisition SHA-1: d50204ceeb167714cc692c0dff3fc62567541345
-------------------End of TD2u Log Entry--------------------
If the TD2u had detected any bad sectors on the source drive, it would have added a section at
the end of the TD2u log. This additional section would list the sector address and sector length
of each unreadable region of the source disk.
Save All Logs (Menu 6.2)
You can save all logs to a USB storage device connected to one of the TD2u USB ports. After
connecting a USB storage device to one of the TD2u USB ports, select the Save All Logs option
to save the logs. Logs are saved in an ASCII text format. Use any text editor to view the logs.
Writing Logs to a USB Storage Device
The TD2u lets you write logs to a USB storage device and adheres to the following directory
and naming conventions:
(root dir)/
td2u_logs/
yyyy_mm_dd_hh_ss_operationtype.log
The format of the .LOG filename is described inFiles Created During Disk-to-File Duplication on
page 1.
Delete All Logs (Menu 6.3)
If you want to delete the logs stored in the TD2u internal flash memory, select the Delete All
Logs option. It is not possible to recover the logs after the Delete All Logs procedure is
finished.
Print All Logs (Menu 6.4)
You can print all logs to a USB printer attached to one of the TD2u USB ports. After connecting
a USB printer to one of the TD2u USB ports, select the Print All Logs option to print the logs.
CHAPTER 3 Using the TD2u 55