Tableau TD2u - Page 58

Non-
Volatile
Memory
Information
Stored
User or Case-Spe-
cific Info
Ability to Reset/Clear
Flash #2
TD2u con-
figuration
User-specific
All configuration settings can be
erased and restored to factory
defaults by selecting Setup > Factory
Reset. Configuration settings (exclud-
ing user name and startup mode)
can be reset to defaults using Setup
> Imaging Options >Restore
Options.
TD2u con-
figuration
Case-specific (if case
ID/notes are enabled)
All configuration settings can be
erased and restored to factory
defaults by selecting Setup > Factory
Reset. Alternately, the Case ID/Notes
can be disabled through Setup >
Case Info Options.
TD2u logs
User-specific and
Case-specific
All logs can be erased by either select-
ing Logs > Erase Logs or Setup > Fact-
ory Reset. Alternately, logs can be
erased individually. When viewing a
specific log entry, select the
[Options] soft key, then select Erase
Log.
Real-Time
Clock
Date/Time None
The Date/Time cannot be restored to
a factory default state. However,
after performing a Factory Reset, the
TD2u prompts you to change the
Date/Time within the Setup Wizard.
The Date/Time can also be changed
by selecting Setup > Date and Time.
The Factory Reset and Erase Logs options physically erase the flash memory corresponding to
each item. It is not possible to recover settings or log entries after the flash memory has been
physically erased.
58 Tableau TD2u User Guide Version 1.3.0