CNC-110A Series C-03/C-13 User's manual
2
έᚊཝҋજѣࢨΦ
TAILY AUTOMATION CO.,LTD.
1. INTRODUCTION
CNC-110A is a series of COIL WINDING MACHINE CONTROLLER developed by TAILY
AUTOMATION. It not only retains all the features of previous designs, it also has a low noise
level and is less sensitive to external power fluctuation.
CNC-110A series also features an integrated design:
Putting DC motor speed controller, brake
and power supplier control circuits into one control box, simultaneously achieving size reduction,
high performance and low cost.
In addition to the CNC-110AS "Standard Model,” CNC-110A series also offers CNC-110AE
"External connection model" depending on whether a close-loop driver is provided for various
applications.
CNC-110AS
：
With 0.5HP DC motor driver.
CNC-110AE
：
With winding spindle shaft control interface circuit.
2. MAIN FEATURES
Microprocessor design, easy for program-setting handling.
Three group of memory, ten step in each group.
Non-battery design, using EEPROM for saving memory and can retain it for 10 years.
Build-in DC motor driver circuit, direct connects to 0.5HP DC motor.
The proprietary design of our winding spindle shaft driver, with IR compensation and large
torque, is suitable for various DC motors.
HI/ LOW winding speed adjusted by potentiometer on back panel.
Direct connect DC 24V/12W brake.
Choice of versions for AC 110V, 220V and 240V power source at 50/60Hz.
To Next Page
Loading...
Need help?
General
