CNC-110A Series C-03/C-13 User's manual
6
έᚊཝҋજѣࢨΦ
TAILY AUTOMATION CO.,LTD.
6.7. Slow start turns
Some of coil winding require slow speed start up in the first couple turns, and then become high
speed winding.
In READY mode, press keys, to set the SLOW STOP TURNS. [Setting range
0.1~9.9 turns].
If you do not need this function, set it in
0.0 to start winding in high speed.
6.8. Brake status
Select brake status during motor stop.
Brake off
：
. Brake on
：
.
6.9. Clear all memory
In READY mode, press keys, it will clear all the winding parameter to zero, and
reset all the configurations, then replace by default data.
Be cautious in using this function or all the parameter will be lost.
To Next Page
Loading...