4
2. Take the remaining metal cover and fit it over the exposed edges of the side mouldings,
again taking care to align the ribs with the slots. Clip it securely home.
Figure 3: Cradle Reassembly
Antenna Installation
1. If the antenna is dependent on a ground-plane for its operation, it is recommended that it
be installed in one of the positions shown below:
*1=most preferred *4=least preferred
Figure 4: Recommended Antenna Positions
2. If the antenna is of the ground-independent type, it should be mounted on the vehicle
according to any guidelines supplied with the antenna.
To Next Page
Loading...
