Tait
T2030II - Making a Call

12
English
This section describes how to select a call destination
and set up the call. Depending on the type of radio you
have and the type of call you want to make, refer to the
appropriate section below.
T2030
II All calls available on the T2030II are preset by the
person who programs your radio. Depending on how
your T2030
II is programmed, you will be able to make
calls to various destinations including other radios on
your network and telephone numbers.
To set up a call, press one of the Call ( to )
keys, or the Despatcher ( ) key. All of these keys
can be preset to call different destinations. The
Despatcher ( ) key is most often set to call a base
station or despatcher.
The person who programs your radio will advise you of
the destination called by each key.
T2035
II To make a call on the T2035II :
1 Use the numeric keys to enter the number you want
to call.
2 Press the Call ( ) key to initiate the call.
The person who programs your radio will advise which
preset call and personal ID numbers you should use to
call different destinations.
Depending on programming, you may be able to make
up to three different types of calls:
• Programmed preset calls to any destination.
• Direct calls to the personal IDs of others on your
network.
• Group calls to two or more IDs.
C1
C4
Making a Call