15
English
Additional Information
Status Calls Status Calls permit the rapid exchange of simple
messages without voice conversation. Your radio can
have messages such as “En route” or “At lunch”
preprogrammed.
Emergency
Operation
To utilise the Emergency Operation, your radio must be
connected to a hidden emergency switch, and must be
programmed to make emergency calls.
To make an emergency call, follow the steps below:
• Operate the hidden switch.
• The radio will then send a message to alert the called
party that you are in distress.
• While an emergency call is in progress, your radio will
quietly switch in and out of transmit mode so that
activity around the radio can be monitored.
• You can reset the radio yourself by switching it off and
on.
Despatcher
Operation
The T2030/35
II can be used for Despatcher Operation,
mounted on top of its companion T2008 Power Supply
which is available separately. The radio must be
programmed to be used as a despatcher.
Information
codes when
making a call:
Codes
T2030/35
II
“0. .1” flashing System is busy
“0. . 2” flashing Call unavailable
“0. . 3” flashing Number unobtainable
“0. . 4” flashing Called party busy
To Next Page
Loading...