18
English
Installation
Components of
the T2000
II
Radio Kit
The T2000
II Radio kit includes the following parts:
Figure 1: Radio Kit Components
Recommended
Installation
Tools
• Portable Drill
• Centre Punch
• Drill Bits: 4mm for self-tapping screws, 6mm for nuts
and bolts
•“Pozidriv” Screwdrivers
• BNC Crimp Tool (e.g. Transradio England Duo Crimp
894)
• In-line Power Meter capable of measuring forward and
reflected power at the operating frequency of the radio
• Hammer
• T2000
II Radio Unit
• Microphone
• Complete Cradle
• BNC Antenna Crimp Plug
• Cradle Keys (2)
• Power Cable (5m)
• 4 Ohm Speaker (not for internal speaker models)
Installation Kit
• Two-way Hermaphroditic
Connector (1)
• Socket Receptacle (2)
• 10A 12V Blade Fuse (2)
• In-line Crimp Fuse Holder
(2)
• Self Tapping Screw (4)
• Shakeproof Washer
(4)
• Microphone Clip Kit (1)
• Control Head Mounting
Bracket (T2020
II and
T2040
II only)
To Next Page
Loading...