10 Base Station Specifications TB9300 Specifications Manual
© Tait International Limited August 2022
1.1 Regulatory Information
Test Methods Where applicable, the test methods used to obtain the specifications in this
document are described in the following standards:
■ EN 300 086 (version 2.1.2)
■ EN 300 113 (version 2.2.1)
■ EN 300 219 (version 2.1.1)
■ EN 301 929 Version 2.1.1)
■ EN 301 489 (version 1.9.2)
■ CFR Title 47 Part 15B
■ CFR Title 47 Part 22, 90
■ TIA/EIA-603/603-E
■ AS/NZS 4295
■ RSS-119
Emission
Designators
This equipment is compatible with the emissions listed in the following
table.
You can obtain further details on test methodology and conditions of
compliance testing in all countries from Tait.
1.2 Frequency Bands and Sub-bands
Many of the performance figures in this manual are applicable to all
frequency bands. In some cases the figures refer to specific bands or sub-
bands, and these are identified with the letters listed in the following table.
This table also indicates which base station configurations are currently
available in each frequency band.
Refer to “Compliance Standards” for details of which bands support which
air interfaces.
Emission Designator Common Name
Modulation
Scheme Operating Modes
7K60F2D MPT Control FFSK control channel/traffic channel data
8K00FXD or 7K60FXD 2-slot DMR 4FSK data/control channel
8K00FXD or 7K60FXW 2-slot DMR 4FSK digital voice/data/control channel
To Next Page
Loading...
Need help?
General
