TB9300 Specifications Manual Base Station Specifications 9
© Tait International Limited August 2022
1 Base Station Specifications
The performance figures given in these specifications are applicable only
to equipment operating as an integral part of a TB9300 base station. These
performance figures are minimum figures, unless otherwise indicated, for
equipment operating at standard room temperature (+22 °C to +28 °C
[+71.6 °F to +82.4 °F]) and standard test voltages as follows:
■ AC power management unit (PMU) - 120 VAC and 230 VAC
■ 12 V DC PMU - 12 VDC
■ 24 V DC PMU - 24 VDC
■ 48 V DC PMU - 48 VDC.
The TB9300 is available in the following configurations:
■ 50 W single or dual base station with PMU
■ 100 W single base station with PMU.
■ Rx only base station (when no PA is available)
Notice The software release notes list known issues or limitations of
the base station that may vary from the specifications published in this
document. Please refer to the current software release notes for any vari-
ations to the specifications in this document.
To Next Page
Loading...
Need help?
General
