Tait TB9300 - Page 53

TB9300 Specifications Manual Compliance Standards 53
© Tait International Limited August 2022
RF and EMC
Compliances
The following tables show which variants of the TB9300 have been tested
and approved to the listed standards.
A tick indicates the compliance has been received, a date indicates when
the compliance is expected to be received, and a blank cell indicates there
are currently no plans to apply for this compliance.
a. H1 and H2 bands
b. H1, H2, H3, H4 and H5 bands
c. B3 band only
Safety and
Environmental
Compliances
The TB9300 base station has been tested and approved to the following
standards.
B2 & B3 Band C1 Band C3 Band H Band K4 Band L2 Band
50 W 100W 50 W 100W 50 W 100W 50 W 100W 100W
DMR/MPT
CFR Title 47 Parts 22 and 90
(USA)
✓✓ ✓ ✓
a
✓
a
✓✓ ✓
RSS-119 (CANADA) ✓✓ ✓ ✓
a
✓
a
✓✓ ✓
EN 300 113 (CE) ✓✓ ✓ ✓
b
✓
b
AS/NZS 4768 Appendix A ✓✓ ✓
b
✓
b
Anatel Act #944:2018 (BRAZIL) ✓✓ ✓✓
Anatel Act #943:2018 ✓✓ ✓
RF - Analog
CFR Title 47 Parts 22 and 90
(FCC)
✓✓ ✓ ✓
a
✓
a
✓✓ ✓
EN 300 086 ✓✓ ✓ ✓
b
✓
b
AS/NZS 4295 Appendix B ✓✓ ✓
b
✓
b
EMC
CFR Title 47 Part 15 (FCC)
RSS-Gen (IC)
✓✓ ✓ ✓
a
✓
a
✓✓ ✓
EN 301 489-1, EN 301 489-5 ✓✓ ✓ ✓
b
✓
b
Anatel Act #952:2018 ✓
c
✓
c
✓✓ ✓
Safety
EN62368
UL 60950-1 (E223047)
a
AS/NZS 60950-1, Q090114
a
a. PMU only
Environmental
Low Pressure (Altitude)
b
Vibration
Shock
b. 15000 ft (4572 m)
MIL-STD-810G Method 500.5 Procedure 2
MIL-STD-810G Method 514.6 Procedure 1
MIL-STD-810G Method 516.6 Procedure 1