118 Servicing Procedure TM8100 Mobile Radio Service Manual
May 2004 © Tait Electronics Limited
Task 7 —
Check Transmit and
Transmit-audio
Functions
Check the transmit and transmit-audio functions of the radio as follows:
1. Check whether the radio transmits.
2. If the radio transmits, continue with Step 5. If it does not,
continue with Step 3.
3. Attempt to rectify the fault as described in the charts of Figure 5.5
and Figure 5.6.
4. Re-assemble the radio, if necessary. Conclude with the tasks of
Subsection 5.3 (on page 121).
5. If the reported fault concerns the transmit function — and this has
not
been confirmed — obtain more information from the
Customer. If the reported fault is unspecific, and no fault could
be found with the radio, also obtain more information. Otherwise
re-assemble the radio, if necessary, and conclude with the tasks of
Subsection 5.3.