Tait TM8000 Series User Manual

TM8100 Mobile Radio Service Manual Disassembly and Re-assembly of Radio 125
May 2004 © Tait Electronics Limited
6 Disassembly and Re-assembly of Radio
Introduction This section covers the procedures for disassembling and re-assembling
the radio:
■ detachment of control head
■ disassembly of control head
■ disassembly of radio body
■ re-assembly of radio body
■ re-assembly and attachment of control head
The procedures are detailed in Subsection 6.1 to Subsection 6.5
respectively.
References to
Disassembly and Re-
assembly Procedures
The full sequence of tasks entailed in servicing the radio is given in
Subsection 5.2 (on page 109). During the course of servicing a
particular radio, some or all of the above disassembly and re-assembly
procedures will be required. In Subsection 5.2 there are instructions at
the appropriate points regarding which disassembly or re-assembly
procedure needs to be carried out. However, these procedures can also
be followed independently to disassemble and re-assemble the radio.

Tait TM8000 Series Specifications

General

Brand	Tait
Model	TM8000 Series
Category	Radio
Language	English