96 General Information TM8100 Mobile Radio Service Manual
May 2004 © Tait Electronics Limited
Install Applications The upper two buttons in the Contents window of the product support
CD allow for the installation of the programming and calibration
applications:
1. Click the “Programming” button. Installation of the programming
application begins automatically. Follow the instructions on the
screen to complete the installation.
2. Click the “Calibration” button. Installation of the calibration
application begins automatically. Follow the instructions on the
screen to complete the installation.
3. The Contents window remains open following installation of the
above applications. Investigate the remaining features of the
product support CD as described below, or click the Close button
to remove the window.
4. Remove and store the product support CD.
Figure 4.5 The Contents window of the product support CD
To Next Page
Loading...
