Tait TM9300 DMR - Hand-Held Control Head Extension Kits

16 Installation Options TM9300/TM9400 Installation Guide
© Tait Limited December 2015
Head Remote Interface Kit Installation Instructions (402-00093-xx) for full
details.
Hand-Held Control
Head Extension
Kits
The T02-00009-0201/0202/0203/0204 kits can be used to extend the
distance between a hand-held control head and the radio body or a remote
interface box. Cables are provided in lengths of
■ 5ft/1.6m (T02-00009-0201)
■ 10ft/3m (T02-00009-0202)
■ 20ft/6m (T02-00009-0203)
■ 30ft/9m (T02-00009-0204)
A housing unit and gasket encloses the extension cable socket, and
provides additional strain relief and some protection from water and dust
ingress.
Refer to the T02-00009-0201/0202/0203/0204 Hand-Held Control Head
Extension Kits Installation Instructions (402-00095-xx) for full details.
c
b
radio body
remote control head
d
T02-00088-BAAA
remote
interface box
hand-held
control head
remote
microphone
remote PTT
remote speaker
ignition sense
cable
20ft (6m)
remote cable
combining
cable
power
connector
auxiliary
connector
antenna
e
g
h
i
j
f
1!
1)