Tait TP9400 Manual

TN-2817c-AN www.taitradio.com Page 7 of 14
5. Press and Hold F2 Programmable PTT and verify Radio A transmitted audio is received on
Radio B. Release the F2 Programmable PTT and verify Radio B stops receiving audio.
6. Long press F4 on Radio A.
7. Press and Hold F2 Programmable PTT and verify Radio A transmitted audio is not received
on Radio B. Release the F2 Programmable PTT.
8. Press and Hold radio PTT and verify Radio A transmitted audio is received on Radio B.
Release the radio PTT and verify Radio B mutes.
9. Navigate to ‘Bluetooth’ and select ‘Find new devices’. From the list, verify the list of devices
include the device that has just been disconnected.
TP3350
1. Power-on all Bluetooth® devices and ensure they are in pair mode (as per manufacturer’s
instructions).
2. On Radio B, search devices (Menu > Accessories > Bluetooth > My devices > Search
devices).
3. Follow the radio UI prompts until one device is connected.
4. Disconnect the device (Menu > Accessories > Bluetooth > My devices > [Connected device
name] > Disconnect).
5. Hold radio PTT and verify Radio A transmitted audio is received on Radio B through the
internal speaker but not the Bluetooth® device.
6. Navigate to ‘My devices’ (Menu > Accessories > Bluetooth > My devices > [Connected
device name]), verify the option changed to ‘Connect’.
1.5.3 Volume Control (if applicable)
Purpose: Verify the Bluetooth® device speaker volume can be adjusted, and speaker volume
matches the adjusted level (if applicable for the Bluetooth® device under test).
TP9500/9600
1. Power-on both Radio A and Radio B.
2. Put an unpaired Bluetooth® Device into pair mode (as per manufacturer’s instructions) with
Radio A.
3. Press F4 on Radio A.
4. Follow the radio UI prompts until the device is connected.
5. Press and Hold Radio B F2 Programmable PTT and verify Radio B transmitted audio is
received on Radio A. Release the F2 Programmable PTT and verify Radio A stopped
receiving audio. Note the volume level on device connected to Radio A.
6. Adjust the volume to be louder on the device connected to Radio A.
7. Press and Hold Radio B F2 Programmable PTT and verify Radio B transmitted audio is
received on Radio A. Release the F2 Programmable PTT and verify Radio A stops
receiving audio. Note the volume level on device connected to Radio A is louder.

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000