Tait TP9400 Manual

TN-2817c-AN www.taitradio.com Page 9 of 14
9. Repeat the steps above in any other user-specific environments to ensure the audio volume
and clarity is suitable.
TP3350
1. Pair Bluetooth® device (s) to Radio A and/or Radio B depending on the test.
2. Ensure both radios are on the same channel.
3. Wear the paired and connected Bluetooth® device.
4. Press and Hold Radio A PTT, speak into Radio A Bluetooth® device and verify Radio B device
unmutes and audio is heard. Release the PTT and verify the Radio B device mutes.
5. Press Radio A F3 to switch audio source/destination.
6. Press and Hold Radio A PTT, speak into Radio A and verify Radio B device unmutes and
audio is heard. Release the PTT and verify the Radio B device mutes.
7. Press and Hold Radio B PTT, speak into Radio B Bluetooth® device and verify Radio A device
unmutes and audio is heard. Release the PTT and verify Radio A device mutes.
8. Press Radio B F3 to switch audio source/destination.
9. Press and Hold Radio B PTT, speak into Radio B and verify Radio A device unmutes and
audio is heard. Release the PTT and verify Radio A device mutes.
10. Repeat these steps in any other user-specific environments to ensure the audio volume and
clarity is suitable.
When a wired audio accessory is connected to the portable radio (optional)
NB: When a wired audio accessory is connected to the radio accessory connector, the radio speaker
is disabled.
TP9300/9400/9500/9600
1. Pair Bluetooth® device(s) to Radio A and/or Radio B depending on configuration and test.
2. Ensure both radios are on the same channel.
3. Connect the wired audio accessory to Radio A. NB: Ensure the radio is configured for wired
audio accessory usage via Global > PTT > External PTT (1) > Advance EPTT1 > Audio Source
= Aux Mic.
4. Wear the paired and connected Bluetooth® device for Radio A.
5. Press and Hold Radio A F2 Programmable PTT and verify Radio B device unmutes and audio
is heard. Release the F2 Programmable PTT and verify Radio B device mutes.
6. Press and Hold Radio B F2 Programmable PTT and verify Radio A device unmutes and audio
is heard. Release the F2 Programmable PTT and verify Radio A device mutes.
7. Press and Hold Radio A wired audio accessory PTT and verify Radio B device unmutes and
audio is heard. Release the PTT and verify Radio B device mutes.

Tait TP9400 Specifications

General

Battery Type	Li-Ion
Digital Protocol	DMR Tier II
Channel Spacing	12.5 kHz, 25 kHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4 V
Channels	1000