T2200P Weighing Indicator User’s Guide
- 4 -
SECTION 4 KEY DESCRIPTIONS
ZERO or
Set the zero point for all subsequent weighing. The display shows zero.
A secondary function , of "Enter" key when setting parameters or other functions.
TARE or
Tares the scale. Stores the current weight in memory as a tare value, subtracts the
tare value from the weight and shows the results. This is the net weight. Entering a
value using the keypad will store that value as the tare value.
A secondary function ▲, of incrementing the active digit when setting a value for
parameters or other functions.
SHIFT or
Selects the data to be displayed when parts counting and is used for other functions
during setting modes. Will move the active digit to the right when setting values
for some functions.
SMPL or
Select sample quantities when parts counting. Move the active digit left when
setting values for other functions.
FUNC or SET
Used to select the function of the scale. If the scale is weighing it will select parts
counting. Of it is not in weighing mode it will return the user to weighing.
Secondary function ( C ) , is to act as a clear key when setting values for parameters
or other functions.
PRINT or
To print the results to a PC or printer using the optional RS-232 interface. It also
adds the value to the accumulation memory if the accumulation function is not
automatic.
Secondary function (ESC) , is to return to normal operation when the scale is in a
parameter setting mode.
U or UNIT
Change weighing unit.
To Next Page
Loading...
Need help?
General