Taiwan Scale T2200P series User Manual

T2200P serial weighing indicator user’s manual
- 9 -
SECTION 7 PARAMETERS
The scale has 6 parameters that can be set by the user plus a method of entering the
calibration section.
To set parameters press the FUNC key.
The display will show the first function, "F0 H-L".
Pressing the TARE key will cycle through the other functions.
Pressing ZERO key will allow you to set the function. It may be necessary to either
use TARE or set a value using the SMPL key and UNITS key to move the active
digit and then using the TARE key to increment a digit, followed by the ZERO key to
enter the value. Use the PRINT key to leave a parameter unchanged.
For example when the display shows “F0 H-L” press the ZERO key to begin.
The display will show “Set Lo”, press the ZERO key to set the low limit, or press the
TARE key to skip to the next parameter, “Set Hi” for setting the high limit.
After pressing the ZERO key to set a limit, use the SMPL key and SHIFT keys to
change the flashing digit, then use the TARE key to increment the flashing digit.
Continue to the next digit and set it as needed.
When all digits have been set press the ZERO key to store the value. The display
will go back to the parameter just set, i.e. “Set Lo”. Advance to another parameter if
needed or press the PRINT key to return to weighing.
FUNCTION MENU SETTINGS TABLE
FUNCTION
SUB-FU
NCTION
DESCRIPTION
DEFAULT
VALUE
SEt Lo
Set a value for the Low limit. 000.000
F0 H-L
SEt HI
Set a value for the High Limit. 000.000
to CLr
Clears the accumulation memory
without printing the results.
to P-C
Prints the accumulation memory
total and then clears the memory.
F1 toL
to Prt
Prints the accumulation Total, does
not clear the memory.
F2 unt
Set weighing unit ON/OFF, you can
select gram (g), pound (lb), ounce,
Hongkong Jin, Taiwanese jin.
Kg, g,
ounce, lb
SEt dA
Set date, The display will show last
date set or 00.01.01. Enter new
date, format yy. mm. dd
F3 tI
SEt tI
Set time, The display will show
current time Enter new time,
format hh. mm .ss

Taiwan Scale T2200P series Specifications

General

Brand	Taiwan Scale
Model	T2200P series
Category	Monitor
Language	English