12
9. WATER CONNECTIONS
Drain plug
Filter
Hot water
outlet
Cold water
inlet
Gate or ball
valve on inlet
WARNING
Do not reverse the hot outlet and cold
Heater as this will cause your heater to
operate improperly.
•
suitable for potable water systems.
•
the main water supply line and the water heater.
• Only a gate valve or a ball valve is to be used on the cold water supply.
• No stop taps or check valves are to be used as this will void the warranty and damage the wa-
ter heater.
•
• -
heater.
•
COUNTERCLOCKWISE
AND THEN CLEAN AND
REPLACE
1. TURN OFF THE WATER
INLET SUPPLY VALVE.
2. OPEN A HOT WATER
TAP TO RELEASE THE
LINE PRESSURE.
Filter
To Next Page
Loading...
Need help?
General
