13
ELECTRICAL CONNECTION
1. The water heater must be electrically grounded. Do not
2. The water heater requires an AC 240V 50Hz electrical power
supply and draws a current of 0.8A.
3. The weather-proof power point should be no more than 1
metre from the base of the water heater for easy access.
4.
necessary.
5. If the cord supplied with this appliance must be replaced, it
must be replaced with appliance wiring material supplied by
the Manufacturer.
WARNING
When servicing or replacing parts within the water heater, label all wires prior to discon-
To Next Page
Loading...
